Concord Camera 4060 AF manual Lcd

		TROUBLESHOOTING
SYMPTOM	POSSIBLE CAUSE	POSSIBLE SOLUTION
Picture taken is blurry.	Subject or camera was moved as the	Hold camera steady until picture is
	picture was taken.	taken.
	The focus was not locked before	Before taking a picture, press the
	taking the picture.	shutter button half-way to lock the
		focus, and press the shutter button fully
		to capture the picture. (p.12)
There is something wrong with	White balance is not set properly.	Reset the white balance feature to Auto,
the color of your photographs.		or for the specific lighting in the
		surrounding area.
Cannot take a picture or a	Memory is full.	Delete all pictures and continue
video clip.		shooting.
		Download the stored files to your PC
		and delete the files from the camera
		internal memory or memory card.
		Insert a memory card with sufficient
		memory available.
	Camera is not set in picture/video clip	Set the camera to the proper mode for
	taking mode.	recording video clips, or taking
		photographs.
	Power is off.	Turn the power on.
	Camera is in Auto Power off mode.	Turn the power on.
Cannot take a picture or a	The SD card is locked or write	Remove the SD card from the card slot
video clip when using an SD	protected.	and slide the lock switch to off.
memory card.
Picture is blurred when looking	Viewfinder is dirty.	Clean the viewfinder with a soft cloth or
through the viewfinder.		cotton swab. See the Camera
		maintenance section.
Part of the picture/ video clip is	Something was blocking the lens	Keep hands, fingers, etc. away from the
missing.	when taking the picture.	lens when taking a picture.
	The picture was not centered correctly	Leave space around the subject when
	in the viewfinder.	centering the picture in the viewfinder.
Camera is not responding	The battery level is low and the	Replace batteries.
during picture capture.	camera does not have sufficient
	power to complete picture capture.
The shutter button does not	The camera is not turned on.	Turn the camera on.
work.
	The camera is processing a picture;	Wait until the light stops blinking before
	the ready LED light is still blinking.	attempting to take another picture.
LCD
The LCD display is dark.	Protective plastic film still in place on	Make sure the protective plastic film
	the camera.	covering the LCD during shipment, has
		been removed.
	The LCD brightness level is set too	Increase the brightness level on your
	low.	LCD to meet your personal needs. See
		p.31 for setting the brightness.
The LCD screen looks milky	Protective plastic film still in place on	Make sure the protective plastic film
and/or scratched.	the camera.	covering the LCD during shipment, has
		been removed.
The LCD is not displaying	LCD is turned off.	Turn the LCD on, by pressing (	).
anything.	The battery level is low.	Replace the batteries.

50