Concord Camera 4060 AF manual Turning the LCD/ICONS on and OFF, Setting the Time

GETTING STARTED

Setting the Time

ADJUST TIME	ADJUST TIME	ADJUST TIME
01:01AM	01:01 AM	01:02 AM

RETURN

OK SET RETURN

OK SET RETURN

OK SET

The time is displayed in hour, minute format.

1.	Press the joystick	to change the selection in the blinking position until you reach the desired setting.
2.	Press the joystick	to highlight the hour (HH), minutes (MM) or AM/PM.

• The selection will blink when it is highlighted.

3.Repeat steps 1 and 2 until the time is set.

4.Press the OK button to set the time by pressing the joystick in.

Note:

The time can be displayed in a 12-hour or 24-hour format. Please go to page.31 to change this setting. If the battery is removed or dead for more than 4 minutes, the time will return to its default setting.

TURNING THE LCD/ICONS ON AND OFF

The camera has a 1.5” LCD which can frame subjects for image and video clip capture, review stored images and video clips and to display the current camera settings.

4	28/45
A
AWB	N
07 ⁄ 04 ⁄ 03 02:40PM

1.Use the ( ) button to toggle the LCD mode. The LCD mode changes each time the button is pressed as follows:

￿

￿Icons off

￿

￿LCD off

￿

￿LCD on with icons

Note: In order to save battery power, you may turn off the LCD display in ( ) Review Mode, only the LCD icons can be turned on or off.

8