Uniden MHS135DSC owner manual Entering Your User Mmsi Number, Entering a group Mmsi number

arrow (GPS/MEM) to move the cursor to the next space. Press the left arrow (WX/SOS) to back up.

When using the CHANNEL UP and CHANNEL DOWN keys to enter a name, the alphabetic and numeric characters display in the following order:

xx Capital letters (A through Z)

xx Lower-case letters (a through z) xx Punctuation (/ ‘ + -)

xx Numbers (0 through 9) xx One blank space

Entering Your User MMSI Number

## NOTE: Be sure you have the correct User MMSI number before entering it in the radio. The radio only allows you to enter the User MMSI once. If you need to re-enter the User MMSI number, contact customer service (see back page for contact information).

1.When you power up your radio for the first time, it displays MMSI Not Entered and then displays a marine mode screen. Press and hold MENU/CALL; the Enter User MMSI screen displays.

2.Press ENTER-H/M/L. The User MMSI screen displays.

3.Enter the MMSI number as described previously to scroll through the numbers. When the ninth digit is entered, the radio asks if you want to save the number and confirm it. Press ENTER-H/M/Lto save it.

4.Before saving the number, the radio displays the message Confirm number! User MMSI data is Permanent! At this point you can edit the number (press MENU/ CALL), save the number (press ENTER-H/M/L), or return to the marine mode screen (press CLR/SCAN),

Entering a group MMSI number

You can change the group MMSI number as often as you want. The first digit of a group MMSI is fixed at “0.” Follow the steps below to enter a group MMSI number into the radio:

Press and hold	Use the up and down arrows
	to adjust each of the eight
	DSC Setup	digits in turn.

Group MMSI

Group MMSI

0________ 16

USA

Back Save Exit

[MENU] [ENT] [CLR]

1.Press and hold MENU/CALL to display the Call Menu.

2.Scroll to DSC Setup and press ENTER-H/M/L.The DSC Setup menu displays.

3.Scroll to Group MMSI and press ENTER-H/M/L. The Group MMSI screen displays.

4.Group MMSI numbers always start with a 0, so that digit is already entered for you. Enter the MMSI number as described previously. When the ninth digit is correct, press ENTER-H/M/L. The radio asks you to confirm.

5.To save this MMSI number, press ENTER-H/M/L.To cancel this MMSI number, press CLR/SCAN.

E-16 Uniden MHS135DSC Radio Owner’s Manual