Uniden MHS135DSC owner manual Receiving Test Call Setup, Select DSC Setup and then Test Reply

Press and hold

Test

Test

[Manual]

JIM CASSIDY

KENT NEWMAN 16

		USA
Back	Select		Exit
[MENU]	[ENT]		[CLR]

1.Press and hold MENU/CALL to display the Call menu.

2.Select Test.

3.The radio displays the names listed in your directory; use CHANNEL UP and CHANNEL DOWN to choose the directory entry you want to send a test call to and press ENTER-H/M/L.

4.If you want to send a test call to a station that is not in your directory, select Manual. The radio prompts you to enter the MMSI number you want to call. Enter the MMSI number the same way you enter directory entries (see page 22). Enter all nine digits and press ENTER-H/M/L.

5.The radio displays the MMSI number you are about to call and asks you to confirm. If you want to call the displayed number, select Send. To cancel the call, select Exit.

6.The radio automatically switches to channel 70 to transmit the test call request, then switches back to the last-used channel.

7.When the other station acknowledges the test call, the radio displays an acknowledgement screen.

Receiving Test Call Setup

When another station sends you a test call, you can select options to answer the test call manually or have the radio answer automatically.

Press and hold

DSC Setup

Test Reply

Test Reply

Auto 18A

Manual USA

Back Select Exit

[MENU] [ENT] [CLR]

Press and hold MENU/CALL to display the Call menu.

8.Select DSC Setup and then Test Reply.

9.Choose Auto and press ENTER-H/M/L. The radio will automatically send an acknowledgement when it receives a test call.

10.To disable automatic test call reply, repeat the steps above and select Manual.

Uniden MHS135DSC Radio Owner’s Manual E-23