Recharging Batteries

You can recharge nickel-cadmium batteries while they are installed in the PRO340XLUse. the included Cigarette Lighter Power Cord or an optional AC

Adaptor. Be sure to observe the polarity of the Adaptor before connecting it to the radio.

Note: The PRO340XLwill not operate while the batteries are

recharging.
WARNING	I
Do not attempt to charge alkaline batteries in this radio. Make sure you
have installed 10 rechargeable nickel-cadmiumbatteries before
connecting power to the charge connection.
Using the Cigarette Lighter Power Cord
IMPORTANT: The Cigarette Lighter Power Cord is designed to be used
ONLY with negative ground vehicles. Do not attempt to
charge the batteries with the power cord connected to a
positive ground vehicle.

1.Plug one end of the Cigarette Lighter Power Cord into the CHARGE connection on the side of the PRO340XL.

2.Plug the other end of the Cigarette Lighter Power Cord into the v~hicle's cigarette lighter socket.

IMPORTANT: Make sure you have an AC Adaptor that supplies 12V DC

power with the correct polarity before connecting it to the radio.

1. Plug one end of the AC Adaptor into the CHARGEconnection on the side

of the PRO340XL.

2. Connect the other end of the AC Adaptor to an AC power source.

Note: For information on time required to recharge batteries, consult the manufacturer of the battery or AC Adaptor.

Uniden PRO340XL manual Recharging Batteries