Uniden PRO630XL owner manual Mounting the MIC Hanger, Conventional Mounting with Screws

UNIDEN Model PRO630XL

Mounting the MIC Hanger

The MIC Hanger comes in two parts. How and where you mount the MIC Hanger will determine which parts to use.

Conventional Mounting with Screws

Use the front part of the MIC Hanger only. Locate a suitable mounting position and mark and drill two 3mm holes. Fix the MIC Hanger into place with screws.

Conventional Mounting with Double Sided Tape (not supplied)

High quality Double-Sided tape can be found at good retail stores.

Secure the front and back pieces of the MIC Hanger using the supplied binding screws. Locate a suitable mounting position.

Apply high quality Double-Sided tape onto the flat area of the MIC Hanger back piece and then press firmly to the mounting position.

14