Uniden SS E15+1 specs

Use only the

Uniden

rechargeable battery pack (BT-905 or BT-905s) supplied with your cordless telephone.

B. Install the Rechargeable Battery Packs into the Handsets

Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle.

1) Locate the separate battery and battery cover.

2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way.)

Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection.

3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place.

[6]

Image 8

Uniden SS E15+1 owner manual Install the Rechargeable Battery Packs into the Handsets

Contents

SS E15+1 Page Contents Welcome Features Cidcw Controls and Functions Select/channel key p /20 Terms Used in this Manual Installing the Phone Choose the best location Install the Rechargeable Battery Packs into the Handsets Getting Started Set the Visual Ringer Brightness Mount the Base Unit on a Wall Standard wall plate mounting Installing the Beltclip Headset InstallationTo attach the beltclip To remove the beltclip Register Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Activating Caller ID on Call Waiting Setting Name Tag POP ID Setting the Insert Base ringer volume Handset ringer tone and volumeBase ringer on/off Base ringer tone Using Your Phone Making and Receiving Calls Transferring a Call Redialing the last dialed number Traveling Out-of-Range Adjusting the Handset Earpiece VolumeAudio boost Selecting a Different Channel Find Handsets Using Call Waiting Visual Message Waiting Indicator Emergency Dial Storing the Emergency Dial Using the Speed Dial Memory Storing Names and Numbers in Speed Dial Memory If you make a mistake while entering a name Using the Speed Dial Memory Storing Caller ID Messages in Speed Memory Locations Making Calls from Speed Dial Memory Easy Dial When the Telephone Rings Caller ID and Cidcw Caller ID on Call Waiting Caller ID Features Viewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID message Deleting all Caller ID names/numbers Press the delete/transfer key Making a Call from the Caller ID List Changing the Digital Security Code Low battery alert Battery replacement and handling Power Failure Maintenance Troubleshooting SymptomSuggestion Symptom Suggestion Liquid Damage Case Action AC Adapter Information For the base Battery InformationGeneral Information Index K, LO, P, Q X , Y, Z One Year Limited Warranty Uniden SSE15+1 Cordless Phone Australia NEW Zealand Page Page Thank YOU for Buying a Uniden Product