Uniden SS E15+1 owner manual Getting Started

C. Connect the Base Unit and charging cradle, and Charge the Handsets

1) Connect each AC adapter to the DC in 9V jack and to each standard 240V AC wall outlet.

• Connect each AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC

adapter easily.

! Use only the

supplied

AAD--041S

AC adaptor

for the base

and AAD-

GETTING STARTED

2)Place one handset in the main base and the other in the charging cradle with the keypad facing forward.

3)Make sure that the charge/in use LED and charge LED illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the cradle's charging contacts.

Route the cord

To AC Outlet

AC Adapter	To DC IN 9V
(supplied)

	600S AC
	adaptor for
	the charger.
!	Do not use
	any other AC
	adapter.
!	Do not place
	the power cord
	where it
	creates a trip
	hazard or

4)Charge the handset battery packs for at least 15-20 hours before using your new cordless telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged.

[7]

where it could

become

chafed and

create a fire or

electrical

hazard.