5)Once the handset battery packs are fully charged, connect the telephone cord to the tel line jack and to a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance.
Australia
Tel Line adaptor (supplied)
6)After the phone is connected, pick up the handset from the base and press talk. If you do not get a dial tone, check the following:
•Be sure the telephone cord is securely connected to both the base and an active telephone jack.
•Be sure the charge/in use LED is on. If not, check the AC adapter.
•Be sure the handset is fully charged.
•Be sure the battery is installed correctly.
D. Set the Visual Ringer Brightness
The visual ringer switch allows you to set the brightness of the visual ringer/messages LED on the base. There are three options to choose from: high, low and off. If you set the switch to off, visual ringer/messages LED never flashes.
[8]
