Distinctive Ringer Setup
“Distinctive Ringer” allows you to preset memory locations with a designated ring tone. When an incoming call is received and the Caller ID information matches the information in one of the memory locations, the Distinctive Ring that has been stored for that particular caller will sound.
If you have set multiple memory locations with distinctive rings, switching the setting to “Distinctive Off” will result in no distinctive ringing. All incoming calls will have a normal ring tone. Switching to “Distinctive On” will activate all programmed distinctive ring memory locations.
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to “Distinct. Ring”, then press select/ch.
3) Press + or - to choose “Distinctive On” or “Distinctive Off”.
4)Press select/ch, and you will hear a confirmation tone.
5)Press end to exit.
•See ”Storing Phone Numbers, Names, Distinctive Rings, and Speed Dial” on page 25 for storing a Distinctive Ring in the Phonebook.
BASICS
