• You cannot make a call |
from the Caller ID list if |
your phone is connected |
to a private branch |
exchange (PBX). |
Using the Caller ID Message List
Calling a party from the Caller ID list
From Standby mode
1) Press call id/ . The summary screen appears. The screen shows the number of new messages and the total number of messages.
2) Use the number keypad
• When a long distance |
call has been set, “1” |
appears in the display. |
• If a call comes in via a |
telephone system that |
does not offer Caller ID |
service, no information |
is stored. |
3)Press talk/flash or spkr. The displayed phone number dials automatically.
From Talk mode
1)Press talk/flash.
2)Press call id/ . The summary screen appears.
3)View the Caller ID message you want to dial.
4)Press select/ch. The displayed phone number will be dialed.
Connecting 8002971023
Long Distance calls and Area Code Setting/Cancellation
While the present Caller ID information is displayed, pressing 
/tone will place or remove the prefix “1” in the display to set the call for a long distance call, or pressing # will set or cancel an area code. (See page 16.)
Storing Caller ID messages in the Phonebook/RocketDial
Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming call information (i.e., Caller ID list), the phone number and name of the party on the Caller ID list can be stored in memory.
1) When the phone is in the standby mode, while the incoming Caller ID information is displayed, press 
/RocketDial/ .
2) Press + or - to choose “Store in PB?” (Phonebook locations) or “Store in SD?” (RocketDial location). To cancel Storing, select “Cancel”.
