NEC 2000 IVS manual Switch Settings

PN-SC02 (ICH)

(3) Switch Settings

Switch Settings

SWITCH		SWITCH	SETTING							FUNCTION						CHECK
	NAME	NUMBER	POSITION
SENS		4 - F	Set the switch to match the AP Number (04 - 15) to be set by CM05.
(Rotary SW)
		AP NO.	04	05	06	07	08	09	10		11	12	13	14	15
		SW NO.	4	5	6	7	8	9	A		B	C	D	E	F
Note 1

	0 - 3	Not used
MB (Toggle SW)	UP	For make-busy
ON
	DOWN	For normal operation
Note 2
SW0	1	Always set to OFF
(Piano Key SW)	OFF
OFF	2	Always set to OFF
4	OFF
3	3	Always set to OFF
2	OFF
1	4	Always set to ON
ON	ON

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned.

Note 1: Set the groove on the switch knob to the desired switch position.

Note 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.

ND-45504 (E) CHAPTER 4

Page 95

Revision 2.0