PN-AP01 (AP01)
Switch Settings (Continued)
SWITCH NAME | SWITCH | SETTING | FUNCTION | CHECK | |||
NUMBER | POSITION | ||||||
|
|
|
|
| |||
SW0 (Dip SW) |
| 1 | OFF | Always set to OFF |
| ||
|
|
| 2 | OFF | Always set to OFF |
| |
ON | 1 2 3 | 4 | 3 | OFF | Always set to OFF |
| |
|
| ||||||
|
|
| 4 | OFF | Always set to OFF |
| |
The figure in the SWITCH NAME column and the position in 
in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and 
, the setting of the switch varies with the system concerned.
Note 1: Set the groove on the switch knob to the desired switch position.
Note 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.
CHAPTER 4 |
Page 61
Revision 2.0
