NEC 2000 IVS manual Switch Settings

									PZ-PW86 (D) (PWR)
	(3) Switch Settings							Switch Settings
	SWITCH NAME						SWITCH	SETTING	FUNCTION	CHECK
							NUMBER	POSITION
MODE							1	OFF	Always set to OFF
				ON					Float charging, for sealed batteries (Normal
								ON	Setting).
		1							OPTION: Periodic Equalize charging of
							2
		2							external vented batteries.
								OFF	Flaot charging, for vented batteries only.
SW1								ON	For turning AC power and the battery on
	ON (I)
									For turning AC power and the battery off
	OFF (O)							OFF
	100/120 VAC							UP	AC INPUT: 90 V - 138 V
									AC INPUT: 180 V - 264 V
								DOWN
			240 VAC
SW102									To start each PIM on battery power, when
								PRESS	AC power is not provided (switch “SW”
								MOMENTARILY	must be ON)
SW301							1	ON	CR Voltage: 75 Vrms
20Hz						25Hz		OFF	CR Voltage: 90 Vrms
					2	OFF		ON	Frequency: 20 Hz
	ON				1
							2
								OFF	Frequency: 25 Hz
	75V					90V

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned.

ND-45504 (E)CHAPTER 4

Page 51

Revision 2.0