NEC 2000 IVS manual Note 1: Set the groove on the switch knob onto the intended switch position

PN-SC01 (DCH)

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned.

Note 1: Set the groove on the switch knob onto the intended switch position.

Note 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.

ND-45504 (E)CHAPTER 4

Page 93

Revision 2.0