NEC 2000 IVS manual Always set to Rotary SW Not used SW51 Dip SW D15

PN-CC00 (ETHER)

(3) Switch Settings

Switch Settings

	SWITCH	SWITCH	SETTING			FUNCTION			CHECK
	NAME	NUMBER	POSITION
SW			0	Always set to 0
(Rotary SW)
			1-F	Not used
SW51 (Dip SW)		1 (D15)	ON
							ON:0 OFF:1
		2 (D14)	ON
ON	1 2 3 4 5 6 7 8				MAC ADDRESS		SWITCH SETTING
		3 (D13)	ON
		4 (D12)	OFF		00003225 1 X X X
					(HEX)
		5 (D11)	ON				SW51-1 (D15)	ON
Note
			OFF		Fixed		SW51-2 (D14)	ON
							SW51-3 (D13)	ON
		6 (D10)	ON
							SW51-4 (D12)	OFF
			OFF
		7 (D9)	ON
							SW51-5 (D11)	ON/OFF
			OFF
							SW51-6 (D10)	ON/OFF
		8 (D8)	ON
							SW51-7 (D9)	ON/OFF
			OFF
							SW51-8 (D8)	ON/OFF
SW31 (Dip SW)		1 (D7)	ON
			OFF				SW31-1 (D7)	ON/OFF
ON	1 2 3 4 5 6 7 8
		2 (D6)	ON
							SW31-2 (D6)	ON/OFF
			OFF
							SW31-3 (D5)	ON/OFF
		3 (D5)	ON				SW31-4 (D4)	ON/OFF
Note
			OFF
		4 (D4)	ON				SW31-5 (D3)	ON/OFF
			OFF				SW31-6 (D2)	ON/OFF
		5 (D3)	ON				SW31-7 (D1)	ON/OFF
							SW31-8 (D0)	ON/OFF
			OFF
		6 (D2)	ON
			OFF
		7 (D1)	ON
			OFF
		8 (D0)	ON
			OFF

Note: Each equipment must have a unique MAC address to distinguish between systems. Therefore, when more than one PBX is installed in the same network, assign the lower 3 digits of the following MAC address by SW31 and SW51 to prevent duplicate addresses.

000032251 XXX (HEX)

According to the switch setting of SW51 (D11-D8) and SW31 (D7-D0).

Fixed

CHAPTER 4 ND-45504 (E)

Page 68

Revision 2.0