NEC 2000 IVS manual PN-SC03ICH

PN-SC03 (ICH)

(3) Switch Settings

Switch Settings on ICH Card

SWITCH	SWITCH	SETTING	FUNCTION	CHECK
NAME	NUMBER	POSITION
SENSE	4 ~ F	Set the switch to match the AP Number (04 ~ 15) to be set by CM05.
(Rotary SW)

AP No.	04	05	06	07	08	09	10	11	12	13	14	15
SW No.	4	5	6	7	8	9	A	B	C	D	E	F

Note 1

0 ~ 3	Not used
MB (Toggle SW)		For make-busy
ON	UP
Note 2	DOWN	For normal operation

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned.

Note 1: Set the groove on the switch knob to the intended switch position.

Note 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.

ND-45504 (E) CHAPTER 4

Page 97

Revision 2.0