PN-CP02/PN-CP02-C (MP)
1.Locations of Lamps, Switches, and Connectors
[CP02] Note JP0
SW3
RUN
SW1
SW2
CLKIN STBY
SW4
MT
RS
Note: Location of JP0 is different between CP02 and
2.Lamp Indications
|
| Lamp Indications | |
|
|
| |
LAMP NAME | COLOR | FUNCTION | |
|
|
| |
|
| • Flashes at 120 IPM while the circuit card is active status and operating normally. | |
RUN | Green | • Flashes at 30 IPM or 15 IPM while the circuit card is stand by status. | |
Normally operating: 30 IPM (1 sec - ON, 1 sec - OFF) | |||
|
| ||
|
| Copying office data: 15 IPM (3 sec - ON, 1 sec - OFF) | |
|
|
| |
CLKIN | Green | Lights while receiving clock signals to the PLO oscillator. | |
|
|
| |
STBY | Red | Lights when the circuit card is in the standby mode. | |
|
|
|
CHAPTER 4 | |
Page 39 | |
OCTOBER, 1998 | Revision 2.2 |