NEC 2000 IVS manual Lamp Indications, OFF: Fixed path is not connected

PN-2DPCB (DPC)

(2) Lamp Indications

			Lamp Indications
LAMP NAME	COLOR		FUNCTION
			ON: Ready for digital data transmission or the circuit is busy.
			OFF: Fixed path is not connected.
BL0	Red		Flash (60IPM): Make-busy state or the system data for this card is not as-
			signed.
			Flash (120IPM): Fixed path is connected.
LB01	Red		ON: Loop Back 1 is set.
			OFF: Normally operating.
LB02	Red		ON: Loop Back 2 is set.
			OFF: Normally operating.
		No. 0 Circuit
RSC0	Green		ON: RTS/C signal ON.
			OFF: RTS/C signal OFF.
SDT0	Green		ON: TXD/T signal is “0”.
			OFF: TXD/T signal is “1”.
RDR0	Green		ON: RXD/R signal is “0”.
			OFF: RXD/R signal is “1”.
CDI0	Green		ON: DCD/I signal ON.
			OFF: DCD/I signal OFF.
			ON: Ready for digital data transmission or the circuit is busy.
			OFF: Fixed path is not connected.
BL1	Red		Flash (60IPM): Make-busy state or the system data for this card is not as-
			signed.
			Flash (120IPM): Fixed path is connected.
LB11	Red		ON: Loop Back 1 is set.
			OFF: Normally operating.
LB12	Red		ON: Loop Back 2 is set.
			OFF: Normally operating.
		No. 1 Circuit
RSC1	Green		ON: RTS/C signal ON.
			OFF: RTS/C signal OFF.
SDT1	Green		ON: TXD/T signal is “0”.
			OFF: TXD/T signal is “1”.
RDR1	Green		ON: RXD/R signal is “0”.
			OFF: RXD/R signal is “1”.
CDI1	Green		ON: DCD/I signal ON.
			OFF: DCD/I signal OFF.

ND-45504 (E)CHAPTER 4

Page 119

Revision 2.0