NEC 2000 IVS manual Application Circuit Cards

	Table 2-1	Functional Outline of Control Circuit Cards (Continued)
CARD NAME	FUNCTIONAL			FUNCTIONAL OUTLINE
	NAME
			Main power supply card.
PZ-PW86/	PWR		Input:	AC100 V/200 V (50 Hz/60 Hz)
PZ-PW86-A			Output:	–2 7 V (8 A), +5 V (8.5 A), CR (30 mA)
			One card per PIM.
			Main power supply card.
PZ-PW86(C)	PWR		Input:	AC100 V/200 V (50 Hz/60Hz)
			Output:	–27 V (4.5 A), +5 V (7.5 A), CR (30 mA), +80 V (110 mA)
			One card per PIM.
			Main power supply card.
PZ-PW86(D)	PWR		Input:	AC100 V/200 V (50 Hz/60 Hz)
			Output:	–2 7 V (4.5 A), +5 V (7.5 A), CR (30 mA), +80 V (110 mA)
			One card per PIM.

2.APPLICATION CIRCUIT CARDS

Table 2-2shows the functional outline of each application circuit card.

	Table 2-2	Functional Outline of Application Circuit Cards
CARD NAME	FUNCTIONAL		FUNCTIONAL OUTLINE
	NAME
			Application Processor card.
PN-AP00-A	AP00		This card is equipped with four RS-232C ports, and is used for SMDR, H/M Print-
			er, PMS functions and MCI.
			One card per system.
			Application Processor card.
			This card is equipped with one RS-232C port and one Ethernet interface port, and
PN-AP01	AP01		is used for OAI function. Also, this card is used to expand authorization code and
			ACD.
			One card per system.
			Basic Rate (2B+D) Interface Trunk card. (S/T Interface)
PN-BRTA	BRI		This card has one circuit of Basic Rate interface and provides one 2-channel PCM
			digital line.
			This card is used for BRI trunks from the Telco to the PBX.
			Basic Rate (2B+D) Interface Trunk card.
PN-2BRTC	BRI		This card has two circuits of Basic Rate interface and provides two 2-channel
			PCM digital lines.
			This card is used for BRI trunks from the Telco to the PBX.
			Memory Expansion card.
PN-ME00	EXTMEM		This card is used with PN-AP00-A card for providing expansion memory.
			This card can be equipped with a SRAM card (1MB) as extra SMDR data memo-
			ry.
			Ethernet Control card.
PN-CC00	ETHER		This card is used with the PN-AP01 card to accommodate the Ethernet, transmit-
			ting/receiving a signal of TCP/IP protocol.
CHAPTER 2			ND-45504 (E)
Page 4			Addendum-001
Revision 2.1			JULY, 1998