NEC 2000 IVS manual BS00/BS01 Card Mounting Slots PN-PW00 Extpwr

2.4 PN-BS00-A/PN-BS00-B (BS00), PN-BS01-A/PN-BS01-B (BS01)

1.In a one-PIM system, neither the PN-BS00-A/PN-BS00-B nor the PN-BS01-A/PN-BS01-B is needed.

2.When the system is equipped with more than one PIM, mount a PN-BS00-A/PN-BS00-B in the BUS slot of PIM0 or PIM(H)0.

3.When the system is equipped with more than one PIM, mount one PN-BS01-A/PN-BS01-B in the BUS slot of PIM1 through PIM7, as required.

	B	B
PIM3	S	S	PIM7
	0	0
	1	1
	B	B
PIM2	S	S	PIM6
	0	0
	1	1
	B	B
PIM1	S	S	PIM5
	0	0
	1	1
	B	B
PIM0	S	S	PIM4
or	0	0
PIM(H)0	0	1

Figure 3-4 BS00/BS01 Card Mounting Slots

2.5 PN-PW00 (EXTPWR)

Mount the PW00 card into the LT01-AP8 slot. A maximum of three PW00 cards can be mounted in one frame (4PIMs).

Note: The PW00 card occupies the adjoining left side (smaller number) slot because of its two-stories structure.

2.6 PZ-PW86 (PWR)

Mount one PZ-PW86 in the PWR slot of PIM0/PIM(H)0 through PIM7, as required.

ND-45504 (E)CHAPTER 3

Page 13

Revision 2.0