NEC 2000 IVS manual Data write into the No.1 circuit is enabled

							PN-2DATA (DAT)
(3) Switch Settings
						Switch Settings
	SWITCH			SWITCH	SETTING	FUNCTION		CHECK
	NAME			NUMBER	POSITION
		SW			ON	Data write into the No.1 circuit is disabled.
(Piano Key SW)				SW-0
					OFF	Data write into the No.1 circuit is enabled.
ON
SW1					ON	Data write into the No.1 circuit is disabled.
SW0				SW-1
						Data write into the No.1 circuit is enabled.
			OFF		OFF

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned.

ND-45504 (E)CHAPTER 4

Page 107

Revision 2.0