Uniden TRU9280 manual Connecting the Base and Charging the Handset

Connecting the Base and Charging the Handset

) Connect the AC adapter to the DC IN 9V jack.

CAUTION: To avoid risk of fire and shock, only use the Uniden AD-800 AC adapter.

2)Connect the AC adapter to a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch.

3)Place the handset in the base with the LCD screen facing forward.

4)Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts.

5)Charge your handset at least 15 to 20 hours before plugging into the phone line.

To AC outlet

To DC IN 9V

AC adapter (supplied)

Connecting the Charger and Charging the Handset (Multi-handset packs only)

) Connect the AC adapter to the DC IN 9V jack and to a 120V AC outlet that is not controlled by a wall switch.

Route the cord.

Caution: Use only the Uniden AD-0005 adapter.

2)Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.

3)Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

4)Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time.

To AC outlet To DC IN 9V

AC adapter (supplied)

14