Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.
To adjust the audio tone:
) With the phone in talk mode, press [select/
] to cycle through the three audio tone options.
2)When the desired option appears on the display, stop.
3)After two seconds, the displayed audio tone is set, and the display returns to normal.
Using the Clarity Boost Feature
If you encounter interference while using your phone, you can manually improve the sound by setting the clarity booster to on. This works only when the phone is in use, so while you are on a call:
) Press [menu/clear].
2)Move the cursor to CLARITY BOOST, and then press [select/
]. BOOST ON and B appear in the display. Use the same procedure to turn off clarity booster. BOOST OFF appears.
Finding a Lost Handset
To locate a misplaced handset, press [find hs] on the base when the phone is in standby. All registered handsets will beep for one minute, and PAGING appears on the handset display. To cancel paging, press [find hs] again or any key on the found handset.
31
