Activating the Message Alert

The message alert feature sounds a short alert tone every 15 seconds whenever you have a new message. To turn on the message alert:

From the handset:

) Press [menu/clear]. Select the ANSW. SETUP menu, and then the MESSAGE ALERT submenu.

2)Move the cursor to select ON or OFF.

3)Press [select/]. You will hear a confirmation tone.

Activating Call Screening

Your phone allows you to listen to callers leaving you a message. This call screen feature can be turned on or off.

From the handset:

) Press [menu/clear]. Select the ANSW. SETUP menu and then the CALL SCREEN submenu.

2)Move the cursor to select ON or OFF.

3)Press [select/]. You will hear a confirmation tone.

Setting a Security Code or Personal Identification Number (PIN)

To play your messages from a remote location, you will need to enter a two-digit security code or Personal Identification Number (PIN). The default security code is 80.

From the handset:

) Press [menu/clear]. Select the ANSW. SETUP menu, and then the SECURITY CODE submenu.

2)Use the number keypad ([0] through [9]) to enter a two-digit security code (01-99).

3)Press [select/]. You will hear a confirmation tone.

41

Page 42
Image 42
Uniden TRU9280 manual Activating the Message Alert, Activating Call Screening