Registering TCX905 Accessory or Extra Handsets
If you purchase an accessory handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre- registered handsets display a handset ID number. Handsets that have not been registered display MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base. See Resetting the Handsets on page 24.)
When you register an extra handset to the base, the handset ID will be assigned.
Models | vary! | ↔ registration | ||
Place | Handset | or refer | to | |
on | the | base for | Owner's | Manual |
) | Before registering the TCX905 accessory or other extra handset, the battery pack MUST be charged for | |||
|
|
| ||
2)Place the handset in the base charging cradle to begin registration.
3)While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION COMPLETE. is displayed; the handset has been registered to the base. If REGISTRATION FAILED. appears, please try these steps again.
Registering Other Compatible Handsets
) Disconnect the base AC adapter.
2)While holding the [find hs/intercom] key, reconnect the adapter.
3)On the handset, press and hold [#] until you hear a beep.
4)While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION COMPLETE. is displayed; the handset has been registered to the base. If REGISTRATION FAILED. appears, please try these steps again.
23
