Terminology used in this Manual

Standby

The handset and the base are not in use. If the handset is on the cradle or [ /flash] or [ ] on the

handset or [ ] on the base is not pressed, no line has been activated. No dial tone is present.

 

CID

Caller ID is available from your Telephone provider and is offered to users on a subscription basis.

With this service and a display on your cordless phone, you will be able to see the incoming caller

 

information such as name and phone number.

CID Deluxe

Caller ID with Call Waiting Deluxe features are offered by your Telephone provider with a monthly

or Call

service subscription. With this service and while on an existing phone call, you can use additional

Waiting

menu options when a new caller rings you. By selecting Menu Options, you will be able to see a

Deluxe

complete list of additional features that are available to you. Please see page 37 for details.

CID/CW or

Caller ID with Call Waiting is available by subscription from your Telephone provider. With this ser-

vice, you will be able to view incoming caller information while on a call with another user. This will

CIDCW

allow you the ability to select to talk to this user and put your existing party on hold or make the

 

decision to ring them back.

DirectLink

If you have accessory handsets on your system, you can use two handsets as 2-way radios.

 

 

Accessory

This phone system is expandable and will support a total of ten (10) handsets to one base. The

or Extra

accessory, or extra handset, is a handset that is compatible with this model.

Handsets

 

Global

Apply to registered handsets. If you change something under the global menu, you change it for all

handsets. Only one handset can change global settings at a time, and you have to make sure the

settings

phone is not currently being used.

 

Station

Any handset or the base.

 

 

Talk

A telephone line has been activated on the handset or base, enabling a dial tone.

 

 

Page 6
Image 6
Uniden TRU9480 owner manual Terminology used in this Manual