Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS setting), the answering machine picks up after two rings if you have new messages, and after four rings if there are none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to avoid long distance billing charges.
| From the base |
| From the handset |
) | Press [clock/menu] three times. The base | ) | Press the MENU soft key. Select the ANSW. |
| displays the current number of rings (2, 4, 6, or |
| SETUP menu, and then the RING TIME |
| TS for toll saver) and announces the setting. |
| submenu. |
2) | Press [ /select] or [ /select] until the desired | 2) | Move the cursor to select a Ring Time (2 TIMES, |
| ring time appears. |
| 4 TIMES, 6 TIMES or TOLL SAVER). |
3) | Press [set]. A confirmation tone sounds, and | 3) | Press the OK soft key. You will hear a |
| the answering machine announces the new ring |
| confirmation tone. |
| time. |
|
|
54
