Direct Wall Mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 5-feet of a working phone jack to avoid excessive wire lengths.

Make sure the wall material is capable of supporting the weight of the base and handset.

Use #10 screws with a minimum length of 1-3/8 inches, with anchoring devices suitable for the wall material where the base unit will be placed.

) Insert two mounting screws into the wall, using the appropriate anchoring device, 3-15/16 inches apart. Allow about 1/8 inch between the wall and screw heads for mounting the phone.

2)Refer to the steps on page 15 to complete the mounting process.

16

Page 17
Image 17
Uniden TRU9485 manual Direct Wall Mounting