Adding Accessory Handsets

Your phone supports up to ten (10) handsets, including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger.

Compatible Handsets

Your phone is compatible with the following Uniden 5.8 GHz Digital Accessory Handsets: TCX805, TCX905, TCX400, TCX440, TWX977 and ELX500. Please visit our website at www.uniden.com for the most up-to-date list of compatible handsets. If you purchase an accessory or extra handset, you must register the handset to the original or main base before use. Accessory handsets will not operate until they are registered.

Charge the Accessory Handset

The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger.

) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.

3)Make sure that the charge LED illuminates. If the LED does not

illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging con- tacts.

4) Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time.

24

Page 25
Image 25
Uniden TRU9485 manual Adding Accessory Handsets, Compatible Handsets Charge the Accessory Handset