Uniden TRU9585 manual Using the Answering System, Turning Your Answering System On and Off

Using the Answering System

Turning Your Answering System On and Off

			From the base		From the handset
	) With the phone in standby, press .			) Press [menu/select].
		[	answer on/off].	2)	Select the ANSW. SETUP menu, and then
Turning On	2)	The system announces “Answering System			the ANSWER SETUP submenu.
		is on” and plays the current greeting.		3)	Move the cursor to select ON.
	3)	ANSWER ON appears on the base display.		4)	Press [menu/select]. You will hear a
					confirmation tone.
	) With the phone in standby, press .			) Press [menu/select].
		[	answer on/off].	2)	Select the ANSW. SETUP menu, and then
Turning Off	2)	The phone announces “Answering System			the ANSWER SETUP submenu.
		is off.”		3)	Move the cursor to select OFF.
	3)	ANSWER OFF appears on the base display.		4)	Press [menu/select]. You will hear a
					confirmation tone.

Note: If the answering system announces “No remaining time” when you turn it on, the memory is full (the message counter also shows FL). The answering system can’t record any new messages until you delete some of the saved ones.

Using the Answering System

46