Uniden TRU9585 manual Removing the wall-mount bracket, Wall plate

Place the mounting slots over the pins on the wall plate.

Removing the wall-mount bracket

At the bottom of the base, lift up on the release latch between the two bottom tabs and push the bracket up.

Release latch

Wall plate

Slide the base down to lock it into place.

(To AC outlet)

Note: Mounting the phone directly on the wall

•Be sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device for the wall material.

•Insert two #10 screws (minimum length of 1 3/8 inches, not supplied) into the wall, 3 15/16 inches apart.

•Leave the screw heads 1/8 inch away from the wall to allow room for mounting the phone.

•Align the mounting slots over the screws and slide the base down into place as shown above.

Installing the Phone

14