Uniden manual Setting the UBC-RH96 Backlight

When you turn the Remote Head off, you see the screen to the right which reminds you that power is still applied to the target scanner.

Powering down the remote head does not turn off the Scanner

Brightness Auto-Adjust (mobile scanners only) When you connect a mobile scanner, the Remote Head automatically adjusts its backlight brightness level to match the brightness level of the target mobile scanner. If you change the brightness level on either the Remote Head or the target scanner, the level changes on

Setting the UBC-RH96 Backlight

To adjust the backlight brightness level on the Remote Head, repeatedly press the VOL control. The display cycles through available backlight brightness levels, including off. Stop when you reach the desired level.

both devices at the same time. (This function is not available on Handy Scanners.)

17

UBC-RH96 Digital Scanner OM.indd17 17

10/9/07 4:16:02 PM