guides to keep the cable correctly positioned. Then, route the remainder of the cable toward the location of your target scanner. When doing so, be sure to avoid sharp metal edges of your vehicle’s body, or other possible hazards. Be sure the cable does not interfere with controls, operation of the vehicle, or passenger safety. Insert the cable’s special connector in the front port of the UBCD996T mobile scanner, or the side port of the UBCD396T handy scanner.
Data Port Cable — Firmware Updates
The Remote Head has a data port (see
12
nect the data transfer cable to this port on the bottom of the Remote Head. Connect the other end to the DB9 serial port on your PC. This is the only purpose of this connection.
Important:
For best operation, be sure your scanner always has the latest firmware. Visit www.uniden.com.au (Australian model) or www.uniden.co.nz (New Zealand model) to verify that your scanner has the most
10/9/07 4:16:00 PM
