Uniden UBC73XLT owner manual Connecting an Earphone/Headphone, Connecting an Extension Speaker

Models: UBC73XLT

1 60
Download 60 pages 5.84 Kb
Page 21
Image 21
Connecting an Optional Antenna

UBC73XLT Paper OM.fm Page 21 Monday, May 14, 2007 9:13 AM

Connecting an Optional Antenna

The scanner's BNC connector makes it easy to connect a variety of optional antennas, including an external mobile antenna or outdoor base station antenna.

Note: Always use 50-ohm, RG-58, or RG-8, coaxial cable to connect an outdoor antenna. If the antenna is over 15 metres from the scanner, use RG-8 low- loss dielectric coaxial cable. You can get a BNC adapter at your local electronics store.

Connecting an Earphone/Headphone

UBC73XLT

For private listening, you can plug a 3.5 mm mini- plug earphone or mono headphones (not supplied) into the headphone jack on top of your scanner. This automatically disconnects the internal speaker.

Connecting an Extension Speaker

In a noisy area, an optional extension speaker, positioned in the right place, might provide more comfortable listening. Plug the speaker cable's 3.5-

mmmini-plug into your scanner's jack.

WARNING!

If you connect an external speaker to the scanner's headphone jack, never connect the audio output line to a power supply and ground. This might damage the scanner.

Setting Up Your Scanner

21

Page 21
Image 21
Uniden UBC73XLT Connecting an Earphone/Headphone, Connecting an Extension Speaker, Connecting an Optional Antenna