UBC73XLT Paper OM.fm Page 41 Monday, May 14, 2007 9:13 AM
2.Enter the frequency you want to start from by using the number keys. (Press 
to enter a decimal point).
3.Press Func + 
or Func + 
. The scanner searches, starting from the frequency you entered in Step 2.
If you enter a frequency that is out of range, the scanner sounds an error tone and Error appears.
Press Func + 
to change the search direction downward or Func + 
to change the search direction upward. Frequencies appear during the search.
Notes:
•You can set the delay function on or off during the search or while the search stops.
•You can skip a frequency when the search stops. After the search skip frequency is set, the scan- ner starts direct search again.
Direct Entry Search Hold Mode
To stop searching during direct entry search, press Hold. Hold appears. In this mode, pressing Func + 
changes the search direction downward and pressing Func + 
changes the search direction
upward. 
or 
appears depending on the search direction.
Press Func + 
to decrease the frequency by one step or Func + 
to increase it by one step. Hold
down 
or 
for about 1 second to quickly increase or decrease the frequency.
To resume direct search, press Func + Src or Hold.
or 
appears on the display, showing the search direction.
Special Features
41
