Uniden UBC73XLT owner manual Turning Channel-Storage Banks On and Off

UBC73XLT Paper OM.fm Page 44 Monday, May 14, 2007 9:13 AM

frequencies into channels or when you search frequencies. When the delay feature is on, DLY appears. If it is off, follow one of these steps to program a delay depending on how the scanner is operating,.

•If the scanner is scanning and stops on an active channel where you want to store a delay, quickly press Func + Dly before it continues scanning again. DLY appears.

•If the desired channel is not selected, manually select the channel, then press Func + Dly. DLY appears.

•If the scanner is searching, press Func + Dly while the scanner is searching. DLY appears and the scanner automatically adds a 2-second delay to every frequency it stops on in that band.

To turn off the 2-second delay, press Func + Dly while the scanner is monitoring a channel, scanning, or searching. DLY disappears.

Turning Channel-Storage Banks On and Off

You can turn each channel-storage bank on and off. When you turn off a bank, the scanner does not scan any of the 10 channels in that bank.

While scanning, press the number key that corresponds to the bank you want to turn on or off. Numbers appear at the top of the display, showing the currently selected banks.

The scanner scans all the channels within the displayed banks that are not locked out (see “Lock- ing Out Channels” on Page 45). The bank number flashes when the scanner scans a channel that belongs to the bank.

Special Features

44