UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 24
Programming
Before the UBC785XLT can begin conventional scanning, you must program a frequency into at least one channel.
Repeat this procedure for each channel you want to program.
Storing Frequencies into Channels in Menu Mode
1.Prepare frequencies you received from your dealer or from various sources on the internet.
2.Press MENU.
3.Select 2:SCAN OPTION by rotating the VFO and pressing E.
4.Enter the channel number using the keypad, then press E.
5.Select 1:FREQUENCY by rotating the VFO and pressing E. Then enter the frequency.
C 001 855.0000 FM ENTER CHANNEL No
C 001 
1:FREQUENCY
2:DELAY 3:TONE DATA
6.Enter the alpha tag and press E. (See page 26.)
C 001
855.0000 FM
ALPHA TAG
¡
7.The following display appears. Select the action by rotating VFO, then press E.
If you want to program other channel, select 1:OTHER CHANNEL.
If you want to set other settings for this channel, select 2: CHANNEL OPTION.
If you want to exit the menu, select 3:DONE.
1:OTHER CHANNEL
2:CHANNEL OPTION 3:DONE
☞Remember! You can also use ▲ or ▼ instead of rotating the VFO. Also instead of pressing E, you can press the VFO control.
24
