Uniden UBC 2500XLT manual Using COUNT to Monitor Channel Activity, To activate the Count feature

Using COUNT to Monitor Channel Activity

To determine the amount of channel activity during a scanning session, use the Count feature. It counts the number of times scanning stops on an active channel.

To activate the Count feature:

1.Press [SCAN], and allow the scanner to scan for about 5 to 10 minutes, or longer if desired.

2.Press [MANUAL] to stop scanning.

3.Press [CNT].

"COUN1'appears on the display.

4.Turn the Rotary Tuner or press [MANUAL] to display each channel and the number count (up to "99").

To reset the Count number to "00", press [.] twice.

To exit Count Mode, press [CNT].

28