LNK - appears when data on a voice channel is being received.
DAT - appears when data on a control channel is being received.
ENC - appears when APCO P25 encrypted data is being received on a voice channel.
Using Menu
Press 
on the left side of the scanner to enter the menu. See “Using the Menu” on Page 45 for more information about the scanner’s menu options.
Using Func
To select the function labeled below a key on the front
of the scanner, hold down 
on the left side of the scanner, then press that key. To hold on a system while scanning or temporarily stop on a channel while searching, press 
. To select a system in Scan or
Scan Hold mode, hold down 
and rotate the scroll control.
37 | Setting Up Your Scanner |
