•Set Lockout This setting controls whether the system is scanned when its quick key is enabled. Rotate the scroll control to select your setting, then press the scroll control.
Locked - the system is not scanned
Unlocked - the system is scanned
Note: You can also lock or unlock a system by
pressing 
, selecting the system, then
pressing 
+ L/O.
•Set Hold Time This setting controls how many seconds the scanner scans a system before moving to the next unlocked system.
Enter a value from
Notes:
• If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system activity).
• The default setting is 2 seconds for each system.
• For conventional systems, all unlocked channels will be scanned at least once regardless of this setting.
• The scanner moves to the next system after the hold time expires, any current transmission ends, and the channel delay time expires.
Auto Search and Store
Your scanner’s Auto Store feature lets you search for new frequencies in custom search ranges or within a service search range on a conventional system, or new talk group ID’s on a trunked system.
Searching and Storing | 96 |
