This setting controls the display’s contrast (how light or dark it appears). Use this setting to change the contrast for different viewing conditions. There are 15 contrast settings. You see the change in contrast as you scroll through the settings.
Initializing the Scanner’s Memory
Important! This clears data you have entered. You cannot restore user programmed data that has been deleted.
To initialize the scanner’s memory, turn off the scanner. Then, press 2, 9, and Hold while turning it on.
You can restore factory programmed data when you next see:
Restore Preprogram List? Press “E yes” for
Yes or “.” for No.
Connecting Your Scanner to a Personal Computer
To connect your scanner to a personal computer, you must first set the scanner’s baud rate (the rate at which data is transferred between the scanner and the computer, in bits per second (bps).
Important! Before you start transferring data between your scanner and your computer, make sure the batteries are fresh or fully charged. If the scanner loses power while you are transferring data, its memory might be corrupted and all information programmed in the scanner might
be erased.
Hint: If you have trouble transfer- ring data between your scanner and your computer, try setting the baud rate to a slower setting.
Other Settings | 52 |
