Uniden UBCD396T ID Scan/ID Search Mode, Temporarily Holding On a System, Holding On a Channel

2.Release then press Hold within 2 seconds to hold on the system.

3.Rotate the scroll control to select the channel you want to lock or unlock.

4.Press L/O to lock or unlock the channel.

You can also lock out an active channel by pressing L/O while the scanner is stopped on the channel.

ID Scan/ID Search Mode

While you are scanning a trunked system, the scanner can be in either ID Scan or ID Search mode:

•ID Scan – the scanner only stops on talk group ID’s that you have programmed into the system

•ID Search – the scanner stops on any unlocked talk group that becomes active.

To toggle between ID Scan and ID Search, press then press Scan within 2 seconds while the scanner is scanning the system.

If the scanner does not scan the system long enough

for you to easily do this, press while the scanner

is scanning the system (or press then rotate the scroll control to select the system). Then, release

and press Scan within 2 seconds.

Temporarily Holding On a System

To temporarily hold on a system, press and hold . To hold on a different system, continue to hold and rotate the scroll control to select the system. Normal scanning resumes 2 seconds after you

release .

Holding On a Channel

To hold on a channel, press Hold while the channel is active. To select a different channel, rotate the scroll control. If you scroll past the beginning or end of the current system, the scanner selects channels in the

Basic Operation 42