UNIDEN Model UH013 UHF CB Radio
Operation
Group Scan (GS) Mode
Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority channel see p.12)
To use GS Mode Scanning, press and hold SCAN for 2 seconds. GS icon appears on the display.
GS Scanning checks the Instant Priority Channel for activity regularly.
CAL TSQ DUP 
VOX CTCSS
MON SCN GS BCL INS
SLT SRC HLD SQT M
S/RF
MHz
If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority Scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel, UH013 will continue monitoring the Priority Channel for activity while listening to the active one.
To deactivate SCAN, press the SCAN button or the PTT button.
Press and hold SCAN for 2 seconds to turn off Group Scan Mode.
Rotary |
| CAL TSQ DUP |
|
|
|
MON SCN GS BCL INS |
|
|
| ||
Channel |
|
|
| ||
SLT | SRC HLD SQT M |
|
|
| |
Selector |
|
|
| ||
|
| MHz |
|
| S/RF |
SLCT | SRCH | SCAN | MEM | INST | SQT |
STORE | TSQ | OS/GS | DUP | SET/SKIP | CTCSS |
If SCAN is deactivated while it is tuned to an active channel, the UH013 will stay on that active channel. If none of the channels are active, the UH013 will reinstate the Starting Channel.
If SCAN is deactivated while it is turned to the Instant Priority Channel, the UH013 will remain on NOTE the Instant Priority Channel.
If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone NOTE will be heard and scanning will not start (see Programming Scan Channels - below).
Programming Scan Channels
Select which Scanning Mode you wish to use - OS or GS.
Select the channel you want to store.
Press MEM to store. M icon appears and a short tone beep is heard.
To remove the channel from Memory, press MEM once more. The M icon disappears.
Rotary |
| CAL TSQ DUP |
|
|
|
MON SCN GS BCL INS |
|
|
| ||
Channel |
|
|
| ||
SLT | SRC HLD SQT M |
|
|
| |
Selector |
|
|
| ||
|
| MHz |
|
| S/RF |
SLCT | SRCH | SCAN | MEM | INST | SQT |
STORE | TSQ | OS/GS | DUP | SET/SKIP | CTCSS |
NOTE | OS is indicated by the absence of | |
the GS icon. | ||
| ||
|
|
11
