UNIDEN Model UH013 UHF CB Radio
Operation
CTCSS (Continuous Tone Coded Squelch System)
Turn the Rotary Channel Selector to the desired channel to use CTCSS. Press and hold
SQT for 2 seconds. CTCSS icon flashes.
Turn the Rotary Channel Selector to select the desired CTCSS code 01 - 38. Press SQT once to store the new setting.
Rotary |
|
|
| CTCSS |
|
Channel |
|
|
|
|
|
Selector |
|
|
|
|
|
|
| MHz |
|
|
|
SLCT | SRCH | SCAN | MEM | INST | SQT |
STORE | TSQ | OS/GS | DUP | SET/SKIP | CTCSS |
Channels 05 and 35 are Emergency Channels | If a button is not pressed within 10 |
and channel 11 is a Calling Channel. | seconds the UH013 will automatically |
NOTE CTCSS cannot be selected on these channels. | NOTE exit Select Mode. |
Wide Band Scanning
The UH013 can also scan a wider band of frequencies (Step: 12.5 KHz).
Band | Frequencies |
|
|
A | 400 MHz - 420 MHz |
|
|
B | 420 MHz - 450 MHz |
|
|
C | 450 MHz - 470 MHz |
|
|
D | 470 MHz - 512 MHz | NOTE | Transmission is not possible on wide band |
|
| frequencies. |
1.Press SLCT once.
2.Turn the Channel Selector to select 
.
3.Press and hold SLCT for 2 seconds to store the new setting.
Searching of band A will immediately begin.
Rotary |
| WS CAL TSQ DUP |
|
|
|
MON SCN GS BCL INS |
|
|
| ||
Channel |
|
|
| ||
Selector | SLT | SRC HLD SQT M |
|
|
|
SLCT | SRCH | SCAN | MEM | INST | SQT |
STORE | TSQ | OS/GS | DUP | SET/SKIP | CTCSS |
13
