![](/images/new-backgrounds/1310419/31041931x1.webp)
UNIDEN Model uh044sx UHF CB Radio
OPERATION
OPEN SCAN (OS) Mode (the absence of GS icon indicates that the unit is on OS mode)
Allows continuous scanning of channels stored in the Open Scan (OS) memory.
If an active channel is found, scanning will stop on that channel.
The factory has preprogrammed all the 40 UHF channels into the Open Scan channel memory. However, you can change or customise the channels by following the steps on programming Scan Channels on page 17.
Example. CH40 becomes active
If the received signal cease, the unit will wait for at least 3 seconds for the signal to return, otherwise scanning resumes.
To skip the active channel, press or
. Scanning resumes.
To deactivate SCAN, press the or
.
1.If SCAN is deactivated while in an active channel, the uh044sx will stay on that active channel. If no other channels are active, the uh044sx will reinstate the starting channel.
2.If OS Scanning is initiated when there are no channels programmed in OS memory, an error tone will be heard and scanning will not start.
15