UNIDEN Model uh044sx UHF CB Radio
OPERATION
BUSY CHANNEL LOCKOUT
BCL is used when CTCSS or DCS is selected to prevent transmission when the uh044sx detects a transmission from another unit using the same CTCSS or DCS code.
1. | MENU | nine times. The current BCL | |
Press ENTER | |||
| setting flashes. |
| |
2. | Press | , | to select desired setting. |
3. | Press and hold | MENU to save and exit. | |
|
|
| ENTER |
ROGER BEEP
Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and VOX transmission.) Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off.
However, Roger Beep will not be heard from the speaker.
MENU
1.Press ENTER ten times. The current Roger Beep setting flashes.
2. | Press | , | to select desired setting. |
3. | Press and hold | MENU to save and exit. | |
|
|
| ENTER |
KEY BEEP
Assures the user that the keypad has been properly pressed by emitting a beep tone. This tone can be switched on or off.
1.Press 
eleven times. bP setting flashes.
2.Press 
or 
to change selection.
3.Press and hold MENU to save and exit.
ENTER
22
