Programming Scan Channels
1. Select which Scanning Mode you wish to use OS or GS Mode.
OS is indicated by the absence of the GS icon.
2. | Select the channel you want to store by pressing | or | . |
3. | Press and hold mem for 1.5 secs. to store. MEM icon appears and two | ||
| short tone beeps are heard. |
|
|
4. | To remove the channels from Memory, press and hold | mem | for 1.5 secs. |
once more. Two short tone beeps are heard and the MEM icon disappears.
PRIORITY CHANNEL
The Priority Channel feature allows user to monitor one of 40 channels in the
uh073sx, monitoring it every 1.5 secs. during Group Scanning.
Choosing a Priority Channel
The starting channel, when Group Scanning is initiated, is always the Priority Channel. To change the priority channel setting while scanning, (eg. PRI Channel is CH17 (476.825 MHz ));
a.press 
, to select a higher channel (scanning pauses).
or
b. press 
, to select a lower channel.
DROP-OUT DELAY
While scanning, the uh073sx stops at a busy channel and receives a
transmission. When the received signal is over, the unit will wait for 3 seconds
for the return of the signal, otherwise, the radio resumes scanning.
15
