Turning the unit on I OFF, Adjusting. the volume

-, "

1.Slide the belt clip into place in the belt clip slot as shown in figure 4.

2.Ensure that the clip locks in place by listening for a "click",

1.Pull the belt clip latch away from the unit as shown in figure 5.

2.While pulling the latch, push up on the belt clip to remove it from the radio.

Belt Clip latch

Belt Clip

Belt Clip Slot

(Rear View)

(Figure 4)

(Figure5)

Turning the unit ON I OFF

. Turn the Volume Knob clockwise. The unit will

. "beep" and the display will appear.

Turn the unit off by rotating the Volume knob counter-clockwise until you hear a "click".

Press and hold the monitor button and adjust the volume to desired level.