TROUBLESHOOTING
PROBLEM
Does not
turn on
Reception
isweak
Cannot change channels
Cannot hear other callers on a channel
Range is limited
Sound distortion
problems
SOLUTION
. Check batteries.Ensurethat the
.batteries are installed properly. The batteries may be weak. Replaceold batteries
with four new 11AAA" batteries.
.Turn VOL
. The receiving signal may be
weak and out of range. If this happens pressthe MONITOR key.
.To change channels, press and
hold the MODE key first until the Channel digit flashes on the LCD panel.
Thenpressthe UP or DOWN keys to change channels.
.The CTCSScode feature could be active. To turn off the crcss, set the CTCSScode to zero (0).
.Batteries may be weak. Replace
with new batteries if the battery
.level indicator is Iow.
The maximum range will vary
depending on terrain and environment. Open fields provide the maximum range, while buildings and structuresmay limit the range significantly. Try moving to a different location.
.If you are transmitting, speak in a
normal tone of voice, 2 to 3
inches away from the
.microphone.
If you are receiving, adjust the volume to a comfortable level.
16
